Diondo D5
Multifunctional & Freely Configurable CT System
The multifunctional computed tomography system diondo d5 is designed for all customers, who do not wish to compromise in terms of performance, size and equipment. The wide range of high-performance x-ray sources and high-resolution detectors combined with an adaptable precision manipulator with up to 9 axes constitutes an innovative leap in terms of flexibility and performance.
Features
- A Multitude of Combinations
to suit your specific testing requirements with up to two tubes & two detector variants
- Innovative Software Package
for optional test methods, e.g. Helix CT, diScatter, diPlanar
- Coordinate Measuring Technology
Reproducible 3D measurement technology for highest demands in accordance with VDI/VDE 2630-1.3
- Granite Manipulator
with up to 9 motorized axes for maximum flexibility
- in situ Enhancements
individual solutions for scientific analyses under test conditions
di Scatter
Top level automated scattered radiation correction
Especially in CT systems in the area of >300 kV scattered radiation causes a significant impairment of the image quality. In the case of line detectors, this effect is avoided by a strong pre-collimation. Yet this is at the expense of measurement time, since only a small layer of the test object can be tomographed during one revolution of the object. In terms of measuring time, flat panel detectors are clearly superior to due to their large surface. Because of the lack of collimation the scatter has its unrestricted impact and complicates or even prevents a reliable detection of defects.
diScatter is capable of compensating this impairment almost completely. After carrying out a fully automatic calibration, entire measurement series of structurally identical and similar test objects can be tomographed in high image quality and in very short time.
in situ Computed Tomography
Dimensional Measurement & Material Testing Under Specific Test Conditions
The diondo5 system can be equipped with additional functional modules, e.g. in order to apply close-to-reality conditions such as mechanical, thermal or chemical stress onto the sample – and to observe the impact in the CT. Among these are tensile and pressure testing machines, multiaxial tire constraining units, climate chambers, etc.
Applications
Nothing remains hidden for these test methods
The range of applications includes everything from complex measurements of tiny components up to classical non-destructive testing of voluminous objects. The diondo d5 is used for measuring and analyzing very different test parts and materials such as:
- Cylinder heads, gearboxes
- Cast parts made from steel, aluminum
- Additively manufactured parts
- Injection-molded plastic parts
- Geological samples
- Mechatronic components
Micro Focus Tube | 190 / 225 / 240 / 300 / 320 [kV] | ||
Mini Focus Tube | 450 / 500 / 600 [kV] | ||
Meso Focus Tube | 450 [kV] | ||
Detector | 3K Flat Panel 3000 x 3000 px, 139 [µm] | 4K Flat Panel 4200 x 4200 px, 139 [µm] | Line Detector 3070 px, 200 [µm] |
Fokus-Detector-Distance, Micro Focus Tube | 400 – 2150 [mm] | – | |
Fokus-Detector-Distance, Mini/Meso Tube | 900 – 2700 [mm] | 900 – 2650 [mm] | |
Sample Size, maximal | Ø 1200 x H 2000 [mm] | ||
Scan Volume, maximal Micro Focus Tube | Ø 1000 x H 1500 [mm] | – | |
Scan Volume, maximal Mini/Meso Tube | Ø 1100 x H 1500 [mm] | ||
Sample Weight | 100 / 250 / 350 [kg] | ||
System Dimensions | L 5000 x W 3200 x H 3500 [mm] | ||
System Weight | 45 [t] | ||
diControl Features | DR-Function, Helix CT, Batch Mode, Offset CT, Daily Check, Health Monitor, Limited Angle CT, Metrology 5 μm + L /100, VDI/VDE 2630-1.3 | ||
Manipulation | granite based, 7 / 8 axes, | ||
